14S 55A 3000W LiPo/LiFe/LiTo Battery Charger

The Battery Charger has been designed to provide reliable, quality charging for battery systems in electric drive vehicles.  It can charge up to 14S LiFe battery at 55A , 3000W at AC90V~265V in a smaller size. Many creative technology help to realize up to 94% of efficiency, and the internal temperature is still under 90℃. The following are some new features: 

Features 

• Intelligent control output voltage and current by microprocessor, 100% calibration before delivery 
• ±1% voltage and current accuracy 
• Active PFC: smaller AC input current less interference, and Conform to European Commission Regulation no 278/2009 and Energy Star Version 2.0 
• AC 90-265V worldwide operation: need not any alternative switcher, worldwide safe operation. 
• Low power consumption (less than 1W) at idle mode and standby mode 
• Up to 94% of convert efficiency.  
• Programmable output voltage from 12V to 55V 
• Programmable output current from 1A to 55A 
• TFT color LCD display output Voltage, current, power and internal temperature on time. 
• Over current, over voltage, over load, over temperature, and short circuit protection 
• Short-circuit protection on output, safer and more reliable. 
• 2 Intelligent cooling fans turned on and adjust speed upon the temperature automatically  
• High power density: 698W/Kg 
• Approved by CE 
  
• 12months warranty 

Input  

• Rated Voltage ： AC110 / 220V
• Voltage allowed：AC90 ~ 265V 
• Rated Freq.   ：50/60Hz 
• Freq. Allowed ：47~63Hz 
• Max Current  :  30A @90V, 15A @220V  
• Efficiency: 94% at 65% load and 220Vac input. 
• Active PFC: PF>0.99 at 90VAC and 100% of load; PF>0.97 at 220VAC and 100% of load 

Output   as Power Supply

• Voltage :12 ~ 55V programmed  
• Voltage accuracy: ±1% 
• Current accuracy: ±1% 
• Ripple voltage: 150mV. 
• Current：1 ~ 55A programmed  
• Power: 3000W max. 

Output   as Charger

• Charge current: 1-55A, 3000W max. 

• Battery Type

Protection 

• Over voltage protection, 
• Under voltage Protection, battery voltage is under 2V, don’t charge. 
• Over current protection, 
• Over charge power protection, 3050W max. 
• Over temperature protection, 90℃ max. 
• Short- circuit protection on output. 
• Anti spark on battery connection even 55V battery connect to charger 
• Reverse polarity protection of battery connection
• Prevent any cell from over charging, adjust charge current automatically fit with Chargery BMS 

Mechanical Characteristics  

• Size：268*147*127 (L*W*H, mm) or 10.55 * 5.8 * 5.0 (L*W*H, inch) 
• Weight: 4.3Kg without input cable 
• Input power cable: AWG14 wire, 1.5m length at 220Vac, AWG12 wire is suggested at 110Vac. 
• Output DC connector: XT-90I male connector on C3060A or XT-90 male connector on C3060B 

Package

• C6050 base unit: 1pcs 
• Power cable: 1pcs 
• Communication wire: black, 1pcs 
• XT-90 or XT-90I female conntor:1pcs  
• EHR-2P wire: 1pcs, only for C6050A. 

Order Information

• C6050A-----Remote control charge current 
• C6050B-----Automatic charge

Manual

• C6050A/B manual V2.0 

Video

• AUTO MODE setup instructions