2S-16S 300A BMS

NOTE: Buy BMS and charger combo can save 30usd.  The charger C6830B can charge 4S-16S LiPo/LiFe battery at 30A 1500W.

The Chargery BMS16P is designed especially for LiPo, LiFe and LiTo battery packs applied to Energy Storage   Systems and Electrical Vehicles including E-Motorcycle, E-Scooter and so on. The unit can measure or detect the battery voltage, cell voltage, charge & discharge current, battery temperature, and battery SOC (State of Charge), with the information displayed on the TFT color LCD screen.  It has an Internal balancing function to balance cells to maintain optimal operations of the battery pack being managed. 

Features:

1. Main module Size: 128×98×40 (L×W×T, mm) or 5.1×3.9×1.6 (L×W×T, inch)

2. Main module weight: 430g excluding accessories

3. Display module size:96×80×24 (L×W×T, mm) or 3.8×3.2×0.95 (L×W×T, inch) 

4. Display module weight:130g

Maximum Charge and Discharge Current

Package 

• BMS main unit: 1pcs
• BMS LCD unit: 1pcs
• Standard accessories: 1 set
• Current shunt: 1pcs
  
  

Note:

• Shunt is calibrated before delivery
• Each cell volatage is calibrated before delivery
• Watch below video before installation
• Read Owner manual carefully before operation
• More details please contact us at jasonwang3a@163.com or visit www.chargery.com

Manual

• BMS16P manual V4.3
• DCC contactor manual 

Update 

please visit chargery.com 

Video

• Current Calibration
• BMS update to V4.1
• BMS installation

Current Shunt

Optional DCC contactor----delivery default here is DCC on common port. if need DCC on separate port, please buy on DCC contactor detail pages.

External power board

the External power Board is for connecting battery to external socke on BMS, avoid battery power BMS by voltage sense wire, then improve cell voltage accuracy.