24S 25A 1500W LiPo/LiFe/LiTo Battery Charger

The Battery Charger has been designed to provide reliable, quality charging for battery systems in electric drive vehicles.  It can charge up to 24S Lthium battery at 25A , 1500W at AC90V~265V in a smaller size. Many creative technology help to realize up to 92% of efficiency, and the internal temperature is still under 100℃. The following are some new features: 

Features 

• Intelligent control output voltage and current by microprocessor, 100% calibration before delivery 
• ±1% voltage and current accuracy 
• Active PFC: smaller AC input current less interference, and Conform to European Commission Regulation no 278/2009 and Energy Star Version 2.0 
• AC 90-265V worldwide operation: need not any alternative switcher, worldwide safe operation. 
• Low power consumption (less than 1W) at idle mode and standby mode 
• Up to 92% of convert efficiency.  
• Programmable output voltage from 10V to 102V 
• Programmable output current from 1A to 25A 
• TFT color LCD display output Voltage, current, power and internal temperature on time. 
• Over current, over voltage, over load, over temperature, and short circuit protection 
• Short-circuit protection on output, safer and more reliable. 
• 2 Intelligent cooling fans turned on and adjust speed upon the temperature automatically  
• ZVS/ZCS and Synchronous Rectification assure the highest efficiency.  
• High power density: 652W/Kg 
• Approved by CE 
  
•  24 months warranty 

Input  

• Rated Voltage ： AC110 / 220V
• Voltage allowed：AC90 ~ 265V 
• Rated Freq.   ：50/60Hz 
• Freq. Allowed ：47~63Hz 
• Max Current  :  18A @90V, 7.5A @220V  
• Efficiency: 92% at 65% load and 220Vac input. 
• Active PFC: PF>0.99 at 90VAC and 100% of load; PF>0.97 at 220VAC and 100% of load 

Output   as Power Supply

• Voltage :10 ~ 102V programmed  
• Voltage accuracy: ±2% 
• Current accuracy: ±2% 
• Ripple voltage: 150mV. 
• Current：1 ~ 25A programmed  
• Power: 1500W max. 

Output   as Charger

• Charge current: 1-25A, 1500W max. 

• Battery Type

Protection 

• Over voltage protection, 
• Under voltage Protection, battery voltage is under 2V, don't charge. 
• Over current protection, 
• Over charge power protection, 1500W max. 
• Over temperature protection, 100℃ max. 
• Short- circuit protection on output. 
• Anti spark on battery connection even 102V battery connect to charger 
• Reverse polarity protection of battery connection
• Prevent any cell from over charging, adjust charge current automatically fit with Chargery BMS 

Mechanical Characteristics  

• Size：278*145*68 (L*W*H, mm) or 10.8 * 6.7 * 2.7 (L*W*H, inch) 
• Weight: 3.2Kg without input cable 
• Input power cable: AWG14 wire,  1.5m length 
• Output DC connector: XT-90I male connector on C10325A or XT-90 male connector on C10325B 

Package

• Charger unit: 1pcs  
• Power cable for AC: 1pcs, AWG14 wire, 1500mm length  
• Communiation wire: 1pcs  
  
• XT-90 or XT-90I female conntor:1pcs 
  

Order Information

• C10325A-----Remote control charge current 
• C10325B-----Automatic charge

Manual

• C10325A/B manual V2.0

Video

• AUTO MODE setup instructions