The Battery Charger has been designed to provide reliable, quality charging for battery systems in electric drive vehicles. It can charge up to 24S Lthium battery at 25A , 1500W at AC90V~265V in a smaller size. Many creative technology help to realize up to 92% of efficiency, and the internal temperature is still under 100℃. The following are some new features:
- Intelligent control output voltage and current by microprocessor, 100% calibration before delivery
- ±1% voltage and current accuracy
- Active PFC: smaller AC input current less interference, and Conform to European Commission Regulation no 278/2009 and Energy Star Version 2.0
- AC 90-265V worldwide operation: need not any alternative switcher, worldwide safe operation.
- Low power consumption (less than 1W) at idle mode and standby mode
- Up to 92% of convert efficiency.
- Programmable output voltage from 10V to 102V
- Programmable output current from 1A to 25A
- TFT color LCD display output Voltage, current, power and internal temperature on time.
- Over current, over voltage, over load, over temperature, and short circuit protection
- Short-circuit protection on output, safer and more reliable.
- 2 Intelligent cooling fans turned on and adjust speed upon the temperature automatically
- ZVS/ZCS and Synchronous Rectification assure the highest efficiency.
- High power density: 652W/Kg
- Approved by CE
- 24 months warranty
- Rated Voltage ： AC110 / 220V
- Voltage allowed：AC90 ~ 265V
- Rated Freq. ：50/60Hz
- Freq. Allowed ：47~63Hz
- Max Current : 18A @90V, 7.5A @220V
- Efficiency: 92% at 65% load and 220Vac input.
- Active PFC: PF>0.99 at 90VAC and 100% of load; PF>0.97 at 220VAC and 100% of load
Output as Power Supply
- Voltage :10 ~ 102V programmed
- Voltage accuracy: ±2%
- Current accuracy: ±2%
- Ripple voltage: 150mV.
- Current：1 ~ 25A programmed
- Power: 1500W max.
Output as Charger
- Charge current: 1-25A, 1500W max.
- Battery Type
- Over voltage protection,
- Under voltage Protection, battery voltage is under 2V, don't charge.
- Over current protection,
- Over charge power protection, 1500W max.
- Over temperature protection, 100℃ max.
- Short- circuit protection on output.
- Anti spark on battery connection even 102V battery connect to charger
- Reverse polarity protection of battery connection
- Prevent any cell from over charging, adjust charge current automatically fit with Chargery BMS
- Size：278*145*68 (L*W*H, mm) or 10.8 * 6.7 * 2.7 (L*W*H, inch)
- Weight: 3.2Kg without input cable
- Input power cable: AWG14 wire, 1.5m length
- Output DC connector: XT-90I male connector on C10325A or XT-90 male connector on C10325B
- Charger unit: 1pcs
- Power cable for AC: 1pcs, AWG14 wire, 1500mm length
- Communiation wire: 1pcs
- XT-90 or XT-90I female conntor:1pcs
- C10325A-----Remote control charge current
- C10325B-----Automatic charge