14S 55A 3000W NMC LiFePO4 LTO Lead acid Battery Charger

The Battery Charger has been designed to provide reliable, quality charging for battery systems in electric drive vehicles. It can charge up to 14S LiFe battery at 55A , 3000W at AC90V~265V in a smaller size. Many creative technology help to realize up to 94% of efficiency, and the internal temperature is still under 90℃. The charger is mainly applied to electric bike and electric motorcycle.

Features

Intelligent control output voltage and current by microprocessor, 100% calibration before delivery
±1% voltage and current accuracy
Active PFC: smaller AC input current less interference, and Conform to European Commission Regulation no 278/2009 and Energy Star Version 2.0
AC 90-265V worldwide operation: need not any alternative switcher, worldwide safe operation.
Low power consumption (less than 1W) at idle mode and standby mode
Up to 94% of convert efficiency.
Programmable output voltage from 12V to 55V
Programmable output current from 1A to 55A
TFT color LCD display output Voltage, current, power and internal temperature on time.
Over current, over voltage, over load, over temperature, and short circuit protection
Short-circuit protection on output, safer and more reliable.
2 Intelligent cooling fans turned on and adjust speed upon the temperature automatically
High power density: 698W/Kg
Approved by CE
12months warranty

Input

Rated Voltage ： AC110 / 220V
Voltage allowed：AC90 ~ 265V
Rated Freq. ：50/60Hz
Freq. Allowed ：47~63Hz
Max Current : 30A @90V, 15A @220V
Efficiency: 94% at 65% load and 220Vac input.
Active PFC: PF>0.99 at 90VAC and 100% of load; PF>0.97 at 220VAC and 100% of load

Output as Power Supply

Voltage :12 ~ 55V programmed
Voltage accuracy: ±1%
Current accuracy: ±1%
Ripple voltage: 150mV.
Current：1 ~ 55A programmed
Power: 3000W max.

Output as Charger

Charge current: 1-55A, 3000W max.

Battery Type

Protection

Over voltage protection,
Under voltage Protection, battery voltage is under 2V, don’t charge.
Over current protection,
Over charge power protection, 3050W max.
Over temperature protection, 90℃ max.
Short- circuit protection on output.
Anti spark on battery connection even 55V battery connect to charger
Reverse polarity protection of battery connection
Prevent any cell from over charging, adjust charge current automatically fit with Chargery BMS

Mechanical Characteristics

Size：268*147*127 (L*W*H, mm) or 10.55 * 5.8 * 5.0 (L*W*H, inch)
Weight: 4.3Kg without input cable
Input power cable: AWG14 wire, 1.5m length at 220Vac, AWG12 wire is suggested at 110Vac.
Output DC connector: XT-90I male connector on C3060A or XT-90 male connector on C3060B

Package

C6050 base unit: 1pcs
Power cable: 1pcs
Communication wire: black, 1pcs
XT-90 or XT-90I female conntor:1pcs
EHR-2P wire: 1pcs, only for C6050A.

Order Information

C6050A-----Remote control charge current
C6050B-----Automatic charge

Manual

C6050A/B manual V2.0

Video

AUTO MODE setup instructions